DataBridge™ is a wireless I/O transceiver module used for point-to-point bridging of analog, digital, and Serial UART RS-232 data. Two modules automatically link together and function as a wireless cable, bridging both sides through a low-latency, full-duplex wireless RF link.
Signals are sampled and repeated 200 times per second with a latency of only 5 milliseconds. DataBridge™ offers the lowest latency on the market, while maintaining low power and long range. Reliable data delivery is ensured by avoiding interference through frequency hopping, and data integrity is maintained using checksums and acknowledgments.
Using simple jumpers, each DataBridge™ device can be configured as a master or slave, and up to 16 device pairs can operate in the same area by setting a Network ID. UART baud rates are also configurable without software, and can display all I/O and status information for additional control.
No software configuration or programming is required.
Features:
Easy Point-to-Point Wireless
Analog, Digital, and Serial Bridge
6 Digital Inputs, 6 Digital Outputs
2 Analog Inputs, 2 Analog Outputs
UART Data Transmit and Receive
200 Samples per Second
Extremely Low Latency (5mS)
Full-duplex Communication
2.4Ghz Frequency Hopping
Reliable Data Delivery
Up to 16 Device Pairs
1mW or 100mW
Up to 4km Range
Internal or External Antenna
2.7V – 3.6V Operation
Small Form Factor
Power Saving Sleep Mode
RSSI and Link Indication
Temperature and Voltage Monitor
FCC, Canadian, and ETSI Certified
More info:
Datasheet: View DataBridge™ Datasheet
Website: http://www.starmanelectric.com/
Email: info@starmanelectric.com
